玻璃鋼雕塑是雕塑工藝品中的一種，具有質輕，耐腐蝕，成本相對較低的特點，以合成樹脂為基體材料，以玻璃纖維及其制品為增強材料組成的復合材料。那么玻璃鋼雕塑的制作流程是怎樣的？

FRP sculpture is a kind of sculpture crafts. It has the characteristics of light weight, corrosion resistance and relatively low cost. It is a composite material composed of synthetic resin as the matrix material and glass fiber and its products as the reinforcing material. So what is the production process of FRP sculpture?

玻璃鋼雕塑輕質高強、耐腐蝕性能好、絕緣性能好、導熱率低、可設計性好、工藝性優良可以根據產品的形狀、技術要求、用途及數量來靈活地選擇成型工藝，工藝簡單，可以一次成型。

FRP sculpture has the advantages of light weight and high strength, good corrosion resistance, good insulation performance, low thermal conductivity, good designability and excellent processability. The molding process can be flexibly selected according to the shape, technical requirements, purpose and quantity of the product. The process is simple and can be formed at one time.

經濟效果突出，尤其對形狀復雜、不易成型的數量少的產品，更突出它的工藝優越性。所以我們常規見到的雕塑基本上都是由玻璃鋼加工制作而成。

The economic effect is outstanding, especially for the products with complex shape and small quantity that are not easy to form, its process advantages are more prominent. Therefore, the sculptures we usually see are basically made of FRP.

往往在加工前期需要業主方提供相應的圖紙才能進行更為精確的加工，根據本項目的特殊性有業主方提供相應的照片進行加工，我方需要在照片的基礎做出加工深化圖紙以方便進一步的施工。

In the early stage of processing, the owner needs to provide corresponding drawings to carry out more accurate processing. According to the particularity of the project, the owner provides corresponding photos for processing. We need to make processing deepening drawings on the basis of photos to facilitate further construction.

圖紙確認后用樣稿做成我們所要的形狀，在樣稿做好后對照?qǐng)D片再進行精確的二次修改，直于圖片相符。樣稿制作完成后，在往樣稿上涂裝石膏，讓其石膏內部成型。

After the drawing is confirmed, make the sample into the shape we want. After the sample is made, make accurate secondary modification against the picture until it is consistent with the picture. After the sample is made, plaster is applied to the sample to form the interior of the plaster.

石膏成型干透后，在從泡沫上摘取下來，摘取過程中必須小心翼翼，防止在摘取的過程中石膏斷裂，在取下的石膏模具內部刷一遍專用膠再粘貼玻璃鋼絲再刷膠反復需要三次以上。等膠與玻璃鋼絲完全融合及凝固之后，敲碎石膏。

After the gypsum is completely dry, it is removed from the foam. Care must be taken during the removal process to prevent the gypsum from breaking during the removal process. It takes more than three times to brush the special glue inside the removed gypsum mold, paste the glass steel wire and brush the glue again. After the glue and glass steel wire are fully fused and solidified, break the gypsum.

山東浮雕雕塑廠家提醒大家，上一工序完結以后，立體的雕塑外表就成型了，需要用磨光片仔細打磨，在打磨過程中要認真檢查每一處是否飽滿，刮膩?zhàn)诱移健Ｒ陨咸幚硗瓿珊螅谶M(jìn)行整體雕塑的打磨上色。此一個成品精美的玻璃鋼雕塑加工完成。

Shandong relief sculpture manufacturer reminds you that after the last process, the three-dimensional appearance of the sculpture will be formed. It needs to be polished carefully with a polishing sheet. In the grinding process, carefully check whether each part is full and scrape putty for leveling. After the above treatment, the overall sculpture shall be polished and colored. So far, a finished exquisite FRP sculpture has been processed.

玻璃鋼雕塑的制作流程便是以上講解內容了，如果您有什么不了解的地方，歡迎來網站www.libpo.com.cn進行咨詢。

The production process of FRP sculpture is the above explanation. If you don't know anything, please visit www.libpo.com.cn Com.