GRC構件作為外部裝飾的常用材料，GRC構件被廣泛使用，因此客戶通常不只是訂購一個或多個GRC構件。那么，在大量生產GRC構件之前，我們需要準備哪些準備工作？下面
山東GRC構件廠家為您講解。
GRC components are widely used as common materials for exterior decoration, so customers usually do not just order one or more GRC components. So, what preparations do we need to prepare before mass production of GRC components? Next, Shandong GRC component manufacturer will explain to you.
1.產品打樣確認：
1. Product proofing confirmation:
根據甲方提供的效果圖或實物樣品，樣品應注意以下幾點：
According to the renderings or physical samples provided by Party A, the samples should pay attention to the following points:
表面效果符合甲方要求；
The surface effect shall meet the requirements of Party A;
樣品顏色符合甲方要求。
The color of the sample meets the requirements of Party A.
應一次抽取兩個樣本。樣品制成后，銷售人員應對其進行一次檢查，以查看其是否合格。檢查時需要注意檢查表面效果，色差，是否存在毛孔，是否龜裂等，并在將模板照片發送給甲方之前確認樣品正確。甲方確認甲方將發送確認后將樣本打包交給甲方的設計師簽名。設計師將為甲方簽字，另一名將簽字退還給公司以取得商品。
Two samples shall be taken at a time. After the sample is made, the salesperson should first check it to see if it is qualified. During inspection, attention shall be paid to checking the surface effect, color difference, whether there are pores, cracks, etc., and confirming that the samples are correct before sending the template photos to Party A. Party A confirms that Party A will send the samples to Party A's designer for signature after confirmation. The designer will sign for Party A, and the other will sign and return to the company to obtain the goods.
應提醒公司的打樣人員保持樣品配方，并避免在生產產品時再次摻雜。
The proofing personnel of the company should be reminded to keep the sample formula safe and avoid re doping when producing products.
2.圖紙深化確認：
2. Drawing deepening confirmation:
設計師應加深良好的圖紙，并應由公司圖紙主管進行審查。驗證正確之后，會將設計者發送給設計者進行審查。甲方確認圖紙后，甲方應簽字并退還公司。甲方設計者簽名和審查的圖紙應保存在的地方，如有任何爭議，可作為今后的依據。
The designer should deepen the good drawings, and should first be reviewed by the company's drawing director. After verification, the designer will be sent to the designer for review. After Party A confirms the drawings, Party A shall sign and return them to the Company. The drawings signed and reviewed by the designer of Party A shall be kept in a safe place, and in case of any dispute, they can be used as the basis for the future.
3.模具制作模具驗收：
3. Die making and acceptance:
有四種類型的模具。有鋼模，玻璃鋼模，木模和硅樹脂模，并且重復使用率依次降低。鋼模由制造商根據圖紙生產。當需要使用硅膠模具時，使用玻璃纖維增強塑料模具。由于硅樹脂模具相對較軟，因此需要由FRP模具支撐以保持產品的形狀。
There are four types of molds. There are steel mold, glass fiber reinforced plastic mold, wood mold and silicone mold, and the reuse rate decreases in turn. The steel formwork shall be produced by the manufacturer according to the drawings. When silicone mold is required, glass fiber reinforced plastic mold shall be used. Since the silicone mold is relatively soft, it needs to be supported by the FRP mold to maintain the shape of the product.
The above contents are related to the preparation before mass production of GRC components, and I hope they can help you, but I suggest you take a closer look and make corresponding preparations to prevent problems from affecting your own engineering use. Follow us http://www.libpo.com.cn , learn more!
